Example of glass cutting. Courtesy of Citrogene.
Example of glass cutting. Courtesy of Citrogene.
Example of glass cutting. Courtesy of Citrogene.
Example of glass cutting. Courtesy of Citrogene.
Glass is a hard yet fragile and delicate material. Thus only the correct tool will reveal its full potential.
Glass is a widely used material, not only for consumer electronics. Processing (cutting or micro-structuring) tempered or non-tempered, flexible, or thick glass with high precision can be a challenging task.
PHAROS or CARBIDE lasers are the most common choice for glass cutting systems builders (quartz, fused silica, borofloat, soda lime, alkali-free boroaluminosilicate, aluminosilicate). When equipped with BiBurst these lasers offer another degree of freedom to improve the process speed and quality.
- 100 fs – 20 ps 连续可调脉宽
- 最大单脉冲能量 4 mJ
- 输出的最小脉宽
- PoD 和 BiBurst 功能
- 高达 5 次谐波或可调谐扩展
- CEP 稳定或重复频率锁定
- 热稳定性和密封设计
- 190 fs – 20 ps 连续可调脉宽
- 最大输出为 120 W 和 2 mJ
- 单脉冲 – 2 MHz 重复频率
- PoD 和 BiBurst 功能
- 高达 5 次谐波或可调谐扩展
- 风冷型号
- 紧凑的工业级设计
- Burst-in-burst 功能– BiBurst，即脉冲串包含子脉冲串功能
- 1 kHz – 2 MHz 载波频率
- 190 fs – 20 ps 连续可调脉宽
- 可调节的振幅斜率
- 可调整GHz和MHz的脉冲数